Serving the Stockton area  ·  (209) 299-0618  ·  Open Mon-Sun 7am-7pm
📞 (209) 299-0618 Free Quote

Metal Roofing in Tracy, CA (95376) · Local Professionals

Stockton Metal Roofing · Fast response in Tracy and the Stockton area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+259Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Tracy sits where the Altamont wind meets the valley sun, and the housing stock shows it. From the rail-town bungalows near the old Southern Pacific depot to the newer stucco subdivisions off Corral Hollow Road, roofs here take a beating that homeowners in milder climates never see.

We are Stockton Metal Roofing, and we serve Tracy (95376) because we know this city's specific mix: 1990s tract homes with tired concrete tile, custom homes on the west side with standing seam already going up, and older downtown places where a metal retrofit over shingles just makes sense. When the wind peels a panel or the sun bakes another sealant failure, our team is a short drive down I-205.

Metal Roofing in Tracy (95376)

Tracy is flat valley floor with heavy clay soil, and that matters more than people think. Water ponds on lots after a hard winter rain, and roof drainage has to be planned, not guessed. The wind coming off the Altamont Pass is steady and strong, which is why we see so many backed-out screws and lifted panels on the west-facing slopes of homes near Tracy Hills and the newer subdivisions along Valpico Road. Older homes near downtown Tracy, including the bungalows around Central Avenue, often have low-pitched shingle roofs and carports where a metal retrofit with proper ventilation is the practical move. The summer UV here is brutal, and sealants on flashing and vents fail faster than most homeowners expect.

Our team has worked on standing seam installations, screw replacement and re-fastening, and full tear-offs across Tracy and the surrounding San Joaquin County area. We know which local suppliers stock the light reflective colors that work with HOA palettes, and we know how to schedule inspections so you are not waiting weeks for a callback.

Our services in Tracy

How a Job Works in Tracy

Step 1: You call (209) 299-0618 or request a free estimate online. We schedule an on-site assessment, usually within a few days, and we look at the roof, the attic if accessible, the flashing, and the drainage. You get a written scope with pricing before any work starts.

Step 2: Once you approve, we pull the permit through the City of Tracy building department and coordinate any HOA design review if your neighborhood has one. On tight lots in the older parts of town, we stage materials in the driveway or on the street according to city rules, and we keep the crew moving so your roof is not torn open longer than necessary. For standing seam and screw replacement jobs, we match fasteners and panels to the existing system so the repair blends in.

Step 3: We clean up daily, magnet-sweep for nails, and do a final walkthrough with you. We do not leave until you have seen the finished work and we have confirmed the gutters and downspouts are flowing away from the foundation.

Pricing in Tracy depends on the size and pitch of your roof, how many layers are already there, and how accessible the property is. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) starts around $7 per square foot, and standing seam starts around $10 per square foot. A basic metal roof repair or leak repair starts around $450, and screw replacement and re-fastening starts around $750. Stone-coated steel and metal shingle roofs start around $9 per square foot, and copper or specialty metal starts around $20 per square foot. Coating and painting starts around $2.50 per square foot. These are starting figures, not final quotes. Call (209) 299-0618 for a free estimate on your specific Tracy property.

My house is in the Tracy Hills area and the west-facing roof gets hammered by Altamont wind. Are standing seam panels the right call?
Standing seam is a strong choice for wind exposure because the panels are attached with concealed fasteners and raised seams, so there are no exposed screws to back out. We install standing seam regularly on the west side of Tracy. That said, we also check the roof deck and underlayment condition, because wind uplift starts at the edges and penetrations. A free inspection will tell you whether a full standing seam install or a targeted repair makes more sense.
A storm just peeled back part of my roof near Valpico Road. How fast can you get out to Tracy for an emergency?
We prioritize active leaks and wind damage. Call (209) 299-0618 and describe the damage. In most cases we can get an inspection scheduled within 24 to 48 hours, and if the roof is open to the weather we will discuss temporary protection while you wait for the repair or insurance process. We document the damage with photos for your claim.
What does a typical metal roof replacement cost for a 1,800 square foot ranch home in Tracy?
For a home that size, a retrofit over existing shingles often lands in the range of $7 to $9 per square foot, while a full tear-off and standing seam install runs higher, around $10 to $14 per square foot depending on pitch, access, and trim details. The biggest cost factors are whether we tear off or retrofit, how many existing layers are there, and whether the roof has complex valleys or skylights. We give you a written number after the free inspection.
Do I need a permit from the City of Tracy to replace my roof?
In most cases yes, a roofing permit is required for a full replacement or re-roof, and the threshold and fees depend on the scope. We handle the permit application and inspection scheduling for you. The City of Tracy building department has the final say on what your specific project needs, so we verify the requirements before we start.
My HOA has design rules about roof color and panel profile. Can you help with that approval?
Yes. We can provide product specs, color samples, and panel profile drawings for your HOA submittal. Many Tracy subdivisions have architectural review requirements, and we are used to working within them. We recommend getting approval before ordering materials so there are no surprises.
Are you fully insured for work on my Tracy property?
Yes. We carry general liability insurance and workers' compensation coverage for our crew.
What maintenance should I do on a metal roof in Tracy to prevent leaks?
The main things are keeping debris out of valleys and gutters, checking flashing around chimneys and skylights once a year, and having exposed fasteners checked every few years. The summer UV here dries out sealant washers, and the wind can back screws out slowly. A quick inspection in the fall before the rainy season catches most problems early. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Stockton

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Stockton

All your work handled by qualified professionals in Stockton

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

259+ Verified Client Reviews in Stockton

⭐⭐⭐⭐⭐ 4.9/5 · 259 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Stockton · Response within 24h · No commitment · ☎ (209) 299-0618

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Stockton ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm