Serving the Stockton area  ·  (209) 299-0618  ·  Open Mon-Sun 7am-7pm
📞 (209) 299-0618 Free Quote

Metal Roofing in Manteca, CA (95336) · Local Professionals

Stockton Metal Roofing · Fast response in Manteca and the Stockton area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+259Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Manteca is a town of sun-baked shingle and tile roofs, from the older ranches off Yosemite Avenue to the tract subdivisions that have filled in around the 120 and 99 interchange. If your roof is baking through another 100-degree summer, we can help.

Homeowners in 95336 call Stockton Metal Roofing because we know how Manteca's mix of older ranch homes and newer stucco subdivisions holds up (or doesn't) under this valley sun. From the tree-lined streets near Manteca High to the newer builds out toward Spreckels Park, we've seen what the heat does to shingles and why metal is often the smarter long-term fix.

Metal Roofing in Manteca (95336)

Manteca sits flat on the San Joaquin Valley floor, and that means two things for your roof: intense summer UV and soil that moves with the seasons. The older ranch homes around town often have low-pitched shingle roofs that have been baked brittle, and the newer subdivisions with concrete tile are hitting the age where underlayment and flashing start to fail. We deal with a lot of sun-damaged shingles, backed-out fasteners, and dried-out sealant, especially on west-facing slopes that take the afternoon sun full-on. When we install metal, we're thinking about thermal movement and how to keep fasteners tight through those 100-degree swings.

Our team has worked on roofs all over Manteca, from the established neighborhoods near Lincoln Park to the newer streets off Airport Way. We know the local building department's permit process, and we know which roof profiles and colors tend to pass HOA review in the planned communities. Whether you're on a quarter-acre lot or a larger parcel with a shop or barn, we can spec a metal roof that fits your property and your budget.

Our services in Manteca

How a Job Works in Manteca

Step 1: You call us at (209) 299-0618 or request a free estimate online. We'll set up a time to come out and look at your roof, whether it's a simple ranch house or a two-story in one of the newer subdivisions. We'll check the condition of your existing roof, look for leaks or damage, and talk through your options, including metal shingles, standing seam, or a retrofit over your current shingles if that makes sense.

Step 2: Once you approve the estimate, we handle the permit paperwork with the City of Manteca and schedule the work. On install day, our crew arrives on time and gets to work. We know that many Manteca lots have tight side yards and driveways, so we plan material staging carefully. If your home is in an HOA, we'll make sure the panel profile and color are approved before we order materials. We also protect your landscaping and keep the job site as tidy as possible while we work.

Step 3: When the job is done, we do a full cleanup, including a magnet sweep for nails and screws. We walk the roof with you, show you the finished work, and make sure you're satisfied. We don't leave until you're happy and your property is clean.

Pricing for metal roofing in Manteca depends on the size and complexity of your roof, the material you choose, and the condition of the existing roof. For a typical single-story ranch home, metal shingle roofing starts around $9 per square foot, and standing seam starts around $10 per square foot. If you're considering a retrofit over your existing shingles, that can start around $7 per square foot, but keep in mind that code limits how many layers you can have. Repairs like fixing a leak or replacing flashing start around $450, and screw replacement or re-fastening starts around $750. We always provide a free, detailed estimate so you know exactly what to expect. Call (209) 299-0618 to schedule yours.

My house is in one of the older neighborhoods near Manteca High, and the roof is original shingle. Is metal roofing a good fit for these older homes?
Yes, it can be. Older homes often have low-pitched roofs that are perfect for metal shingles or a retrofit. We'll check the decking and framing first to make sure it can handle the weight and that any repairs are done before we install. Many homeowners in that area choose metal shingles because they mimic the look of the original shingles but last much longer.
A storm just blew through and lifted some panels on my roof. How fast can you get out to Manteca for an emergency repair?
We offer free inspections for storm and wind damage, and we prioritize emergency calls. Call us at (209) 299-0618 and we'll schedule a visit as soon as possible, often within 24 to 48 hours depending on demand. We'll secure the roof to prevent further damage and provide a written estimate for the repair.
What's the typical cost to replace a shingle roof with metal on a 1,500-square-foot home in Manteca?
For a 1,500-square-foot home, a basic corrugated or ribbed panel roof might start around $5.50 per square foot, while standing seam could be closer to $10 per square foot. So you're looking at roughly $8,000 to $15,000 depending on the material and complexity. We'll give you a precise quote after inspecting your roof and discussing your options.
Do I need a permit from the City of Manteca to install a metal roof, and can you help with that?
Yes, a permit is typically required for a roof replacement or a new metal roof installation. The exact requirements and fees are set by the City of Manteca Building Department, and we recommend confirming details with them. We handle the permit application and inspections as part of our service, so you don't have to worry about the paperwork.
My HOA has strict rules about roof colors. Can you help me get approval for a metal roof?
We can. Many HOAs in Manteca require design review for roof changes. We'll provide you with material samples and specification sheets to submit to your HOA, and we'll coordinate with them if needed. We'll make sure the color and profile you choose meets the community guidelines before we order materials.
Are you fully insured for roofing work in Manteca?
Yes, we are fully insured, carrying both general liability and workers' compensation insurance.
What kind of maintenance does a metal roof need in Manteca's climate?
Metal roofs are low maintenance, but in Manteca's heat, we recommend an annual inspection to check for loose fasteners, debris buildup, and sealant condition. We offer maintenance plans and can also apply a reflective coating to help with energy efficiency. Keeping gutters clear and trimming trees back from the roof will also extend its life.
Why choose us?

Trusted professionals in Stockton

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Stockton

All your work handled by qualified professionals in Stockton

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

259+ Verified Client Reviews in Stockton

⭐⭐⭐⭐⭐ 4.9/5 · 259 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Stockton · Response within 24h · No commitment · ☎ (209) 299-0618

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Stockton ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm