Licensed & Insured, in Stockton and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Stockton
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (209) 299-0618 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Stockton and surrounding areas · On-site visits included · Free estimate within 24h
Stockton Metal Roofing is a team of local certified professionals based in Stockton. We respond quickly in Stockton and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (209) 299-0618⭐⭐⭐⭐⭐ 4.9/5 · 259 verified Google reviews
“Had them put a metal roof on my hay barn out on the east side, about 3,000 square feet of corrugated panel. Crew of four knocked it out in two days and swept the whole yard with a magnet for stray screws. My equipment hasn't seen a drop since.”
Commercial & Agricultural Metal Roofing
“The porch roof on our Victorian was leaking right over the front steps and two other outfits wanted to tear the whole thing off. Stockton Metal Roofing just re-flashed it and replaced a handful of panels instead. Saved us thousands and it's bone dry now.”
Metal Roof Repair
“We retrofitted the metal roof over the old shingles on our orchard packing shed and it came out great. Only reason for four stars is they got rained out and pushed the finish back a few days, but they kept me posted the whole time. Solid work overall.”
Metal Roof Over Shingles (Retrofit)
“Standing seam in charcoal on our 2,400 square foot ranch house. The seams are dead straight and they cleaned up so well you couldn't tell a crew had been there. Honestly the best contractor experience we've had in years.”
Standing Seam Metal Roofing
“They came out to fix a leak around our skylight and ended up redoing the flashing and resealing the vent stack while they were up there. Quick, fair price, and no more drip in the hallway.”
Flashing, Chimney & Skylight Repair
“Full tear-off and replacement on our place in Ripon, and they had the new metal on in under a week. What sold me was the inspection report they gave us beforehand with photos of every bad spot, no surprises on the invoice.”
Metal Roof Replacement
“A windstorm peeled back a section of our metal roof and these guys were out within a couple days to re-fasten panels and replace the bent ones. I was braced for a nightmare and it turned out to be the easiest repair we've dealt with.”
Storm & Wind Damage Repair
“Had them coat and repaint our faded metal roof and it looks brand new, the color match on the trim was spot on. Took them three days for a single-story house and they were careful around the landscaping. Would use them again.”
Metal Roof Coating & PaintingReal photos of our work in Stockton · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener metal roof installation | Starting at $8/sq ft | Includes tear-off, underlayment, and screw-down panels; pitch and deck repairs move the price. |
| Standing seam metal roof installation | Starting at $12/sq ft | Concealed fasteners and clean flashing included; roof complexity and panel gauge raise the rate. |
| Stone-coated steel or metal shingle install | Starting at $11/sq ft | Includes underlayment and trim; historic district or HOA profile requirements can add cost. |
| Metal roof over shingles (retrofit) | Starting at $7/sq ft | Skips tear-off where code allows; existing layer count and deck condition set the final scope. |
| Complex or large-scale metal roof | On estimate | Steep pitch, multiple valleys, chimney and skylight flashing, or commercial scope need an on-site look. |
| Travel and estimate | Free | In Stockton and surrounding areas, no call-out fee; response within 24 hours at (209) 299-0618. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam | Starting at $10/sq ft | Includes panels, clips, underlayment, and standard trim on a straightforward gable roof. |
| Mechanically seamed standing seam | Starting at $12/sq ft | Includes seaming labor and heavier gauge for low-pitch or wind-exposed roofs. |
| Standing seam over existing shingles | On estimate | Needs a deck inspection first to confirm the existing sheathing can carry the new panels. |
| Complex roof with valleys and skylights | On estimate | Cut-up roofs with multiple penetrations take more flashing detail and panel cutting. |
| Travel | Included | In Stockton and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (209) 299-0618, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel replacement | Starting at $9/sq ft | Includes full tear-off, deck inspection, underlayment and new corrugated or R-panel; pitch and deck repair move the price. |
| Standing seam replacement | Starting at $13/sq ft | Includes tear-off, deck repair, concealed-fastener panels and new flashing; roof complexity and panel gauge raise the rate. |
| Stone-coated steel or metal shingle replacement | Starting at $12/sq ft | Includes tear-off, underlayment and profile panels; historic or HOA design review can add material cost. |
| Copper and specialty metal replacement | On estimate | Needs an on-site look because metal gauge, flashing detail and roof geometry vary widely house to house. |
| Travel | Included | In Stockton and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (209) 299-0618, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener R-panel over shingles | Starting at $7/sq ft | Includes slip sheet, underlayment, R-panel and fasteners on a single-layer roof; pitch and penetrations move the price. |
| Stone-coated steel over shingles | Starting at $10/sq ft | Includes textured steel shingles or tiles over existing layer; HOA-approved colors and complex rooflines add cost. |
| Standing seam over shingles | Starting at $14/sq ft | Includes concealed-fastener panels on battens; two-story access and many valleys push the number up. |
| Deck repair or flashing rebuild | On estimate | Soft sheathing or failed chimney and skylight flashing must be seen on site before a number is given. |
| Travel | Included | In Stockton and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (209) 299-0618, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (fasteners, seals, small leak) | Starting at $450 | Covers diagnosis, fastener replacement, lap sealing, and water test on a typical single-story roof. |
| Panel replacement (one to three panels) | Starting at $850 | Includes matching panel, removal, install, and reseal; price rises with pitch and access difficulty. |
| Flashing rebuild (chimney, skylight, wall) | Starting at $650 | Rebuilds failed flashing and seals; cost moves with penetration count and roof height. |
| Storm damage repair with documentation | On estimate | Needs an on-site look to scope damage, photograph evidence, and separate repair from replacement. |
| Travel | Included | In Stockton and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (209) 299-0618, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-source leak repair | Starting at $450 | Covers one failed pipe boot, small flashing repair or short fastener run with written quote before work. |
| Fastener row replacement | Starting at $850 | Full row of UV-degraded screws replaced with new washers, priced by roof length and access. |
| Flashing and boot rebuild | Starting at $650 | New metal counterflashing or pipe boot assembly, priced by number of penetrations and roof pitch. |
| Panel section replacement | On estimate | Profile matching and color match require an on-site look before a number is given. |
| Emergency tarping | Starting at $350 | Storm-rated tarp secured over active leak, credited toward permanent repair if booked same week. |
| Estimate | Free | Response within 24 hours at (209) 299-0618, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot screw replacement | Starting at $750 | Covers mapping and replacing isolated backed-out or stripped screws with new washers on one roof area. |
| Full-slope re-fastening | Starting at $1,450 | Replaces every fastener and washer on a slope; roof size and pitch move the price up. |
| Washer-only replacement | Starting at $950 | Pulls sound screws, fits new UV-rated washers and resets them across the affected runs. |
| Agricultural or commercial re-fastening | On estimate | Long low-slope barn and shop roofs need an on-site count of fasteners and access check first. |
| Travel | Included | in Stockton and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (209) 299-0618, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, standard home | Starting at $5.50/sq ft | Includes panels, underlayment, closures and standard flashing on a straightforward roof. |
| R-panel roof, low-slope or carport | Starting at $6.25/sq ft | Includes trapezoidal rib panels, gasketed screws and edge metal for low-slope sections. |
| Re-fastening and repair on existing panel roof | Starting at $450 | Includes new gasketed screws, closure replacement and flashing touch-ups on small jobs. |
| Complex or large agricultural building | On estimate | Barns, packing sheds and long-span shops need an on-site look at framing and access. |
| Travel | Included | In Stockton and surrounding San Joaquin County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (209) 299-0618, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof install, single-story | Starting at $9/sq ft | Includes tear-off of one layer, underlayment, metal shingles, and standard flashing; pitch and valleys move the price. |
| Retrofit over existing shingles | Starting at $8/sq ft | Includes prepared underlayment and metal shingle system over a sound single layer where local code allows. |
| Slate or shake profile upgrade | Starting at $11/sq ft | Includes premium stamped metal shingle in slate or shake profile with reflective finish and custom trim. |
| Metal shingle repair and re-fastening | Starting at $450 | Includes replacing lifted or damaged shingles, resetting fasteners, and resealing penetrations on existing roofs. |
| Complex or large-scale job | On estimate | Steep two-story roofs, multiple skylights, historic design review, or heavy deck repair need an on-site look first. |
| Estimate | Free | Response within 24 hours at (209) 299-0618, no obligation to book, written scope provided. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel install, standard gable | Starting at $9/sq ft | Includes underlayment, panels, and standard trim on a simple roof with good access. |
| Tear-off of existing shingle or tile | Starting at $2/sq ft | Adds disposal and deck inspection; layered roofs and soft decking push the number up. |
| Complex roof with valleys and dormers | On estimate | Cut-up hip roofs and multiple penetrations need an on-site look before we quote. |
| Repair and re-fastening | Starting at $450 | Covers fastener replacement, resealing, and resetting lifted panels on an existing roof. |
| Travel | Included | In Stockton and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (209) 299-0618, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent and flashing work | Starting at $20/sq ft | Includes formed copper caps and flashing; access and roof pitch move the price. |
| Full copper roof installation | Starting at $20/sq ft | Includes fabricated pans and underlayment; square count and custom trim move the price. |
| Zinc or aluminum specialty panels | On estimate | Priced after we confirm the panel profile, deck condition and flashing scope on site. |
| Custom fabrication and restoration | On estimate | Complex radius and historic profiles need a shop template before we quote. |
| Travel | Included | In Stockton and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (209) 299-0618, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating, basic system | Starting at $2.50/sq ft | Includes wash, primer and one reflective topcoat on a clean, rust-free panel roof. |
| Elastomeric coating system | Starting at $3.75/sq ft | Thicker film for light rust and hairline seams, priced by roof size and rust severity. |
| Rust treatment plus color restoration | Starting at $4.50/sq ft | Spot rust conversion and factory-match or custom color on faded panels. |
| Two-story or steep-pitch home | On estimate | Access, height and pitch drive the number, so we look before quoting. |
| Travel | Included | In Stockton and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (209) 299-0618, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Skylight flashing repair | Starting at $600 | Removal and replacement of skylight curb flashing, sealant, and fasteners, plus a water test at the repair. |
| Chimney flashing and saddle rebuild | Starting at $750 | New bent step flashing and chimney saddle, with old sealant and rusted metal removed and deck checked. |
| Stucco wall or valley transition repair | Starting at $850 | Cutting back stucco or opening a valley, replacing underlayment, and resetting metal with correct laps. |
| Complex or multi-penetration job | On estimate | Multiple chimneys, skylights, or a standing seam roof that needs panels opened and reset before pricing. |
| Travel | Included | In Stockton and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (209) 299-0618, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Perimeter edge and ridge upgrade, single-story | Starting at $1,200 | Covers labor, fasteners and standard trim for a typical single-story Stockton roof |
| Two-story home edge and ridge package | Starting at $1,850 | Higher access and safety setup add time; price depends on total edge and ridge length |
| Custom profile trim match | Starting at $1,600 | Fabrication to match an existing profile on older or historic homes adds lead time |
| Commercial or agricultural building | On estimate | Large roof area and panel type require an on-site look before quoting |
| Travel | Included | In Stockton and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (209) 299-0618, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof and gutter inspection with photos, written repair versus replacement assessment, no obligation to book work |
| Targeted panel and flashing repair | Starting at $350 | Re-seat or replace damaged panel and redo one flashing detail, price moves with roof height and access |
| Screw replacement and re-fastening | Starting at $600 | Pull backed-out fasteners, install correct washers, re-torque field, priced by square footage and roof pitch |
| Section replacement | On estimate | Damaged panel run removal and tie-in needs on-site measurement and material match before a number is given |
| Insurance documentation | Included | Photo record and written damage report formatted for your adjuster, with on-site adjuster meeting when needed |
| Estimate | Free | Response within 24 hours at (209) 299-0618, written scope provided, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic condition inspection | Free estimate | Full roof walk with photo notes, fastener and seam check, and a verbal summary on site. |
| Detailed written report | Starting at $250 | Includes photos, condition ratings, repair priorities, and remaining service life estimate for buyers or insurance. |
| Leak tracing inspection | Starting at $300 | Targeted inspection of flashing, penetrations, and seams to find the source of an active leak. |
| Large or complex roof | On estimate | Two-story, steep pitch, or many penetrations need an on-site look before we quote the inspection. |
| Travel | Included | In Stockton and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (209) 299-0618, no obligation to book the inspection. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless 5-inch K-style gutter | Starting at $9/linear ft | Includes forming on site, hidden hangers, and standard downspouts; run length and hanger type move the price. |
| Seamless 6-inch K-style with 3x4 downspouts | Starting at $13/linear ft | Includes larger trough and high-volume outlets; roof area and pitch drive the count of downspouts. |
| Leaf guards and screens | Starting at $4/linear ft | Includes stainless mesh or perforated covers; tree load from sycamore and valley oak decides the grade. |
| Buried downspout lines | Starting at $18/linear ft | Includes trenching, PVC line, and discharge past the clay; distance from the slab moves the number. |
| Complex or large-scale job | On estimate | Steep two-story standing seam, historic district trim, or HOA color rules need an on-site look before a number. |
| Estimate | Free | Response within 24h at (209) 299-0618, no obligation to book; we water-test and walk the discharge plan. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and written scope | Free estimate | On-site walk of panels, fasteners and flashing, with photos and a written scope you can compare. |
| Screw replacement and re-fastening | Starting at $1,200 | Per building size and screw count, includes washered fasteners and lap resealing. |
| Exposed-fastener R-panel install | Starting at $8.50 per sq ft | Includes panels, closures, flashing and fasteners; deck and purlin repair quoted separately. |
| Standing seam commercial roof | On estimate | Priced after slope, span and clip layout are measured, since panel length drives the number. |
| Retrofit over existing metal | On estimate | Depends on purlin condition and whether subframing is needed before new panels go on. |
| Travel | Included | In Stockton and surrounding San Joaquin County towns, no separate call-out or mileage fee. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Stockton need a crew that understands this valley: hard summer sun, dry Delta wind, and a housing stock that runs from Magnolia Historic District bungalows to Weston Ranch two-stories. Stockton Metal Roofing is the local name for Metal Roof Installation, replacement, re-roof, and repair, backed by a network of licensed, bonded, and insured local contractors.
We work on the low-pitch ranch roofs around Victory Park and the Pacific Avenue corridor, the tract homes of Lincoln Village and Quail Lakes, and the orchard sheds and farm shops out toward Lodi, Linden, and Escalon. From Stockton to Lodi, Manteca, Tracy, and Lathrop, we match the system to the structure and the climate. Call (209) 299-0618 to schedule a free estimate.
Most metal roof leaks in Stockton start at a fastener. On 15 to 30 year old exposed-fastener roofs, the EPDM sealing washer under each screw dries, shrinks, and cracks from years of 100 degree heat and intense UV, and the fastener backs out. Water slips past the head, tracks along the purlin, and shows up on the ceiling far from the actual entry point. Left alone, that moisture rots sheathing and ruins insulation. The same pattern shows up at separated seams from thermal movement, failed pipe boots, and flashing gaps at chimneys, skylights, and valleys. Wind-lifted panels after a storm and punctures from fallen valley oak or sycamore limbs are common too.
Ignoring a small leak is how a repair becomes a re-roof. Water travels along the decking and purlins, so by the time you see a stain, the damage is often wider than expected. Our Metal Roof Leak Repair team traces the source, not just the stain, and fixes the cause.
The honest call matters here. If the panels are sound and the leak is at fasteners or flashing, a full Screw Replacement & Re-Fastening with new washers often restores a watertight roof for a fraction of replacement cost. If panels are perforated, seams are failing across the field, or the deck is soft, replacement is the smarter money. We tell you which one you actually need. Call (209) 299-0618 for a free estimate.
We install the full range of metal systems. Standing Seam Metal Roofing uses concealed clips and a raised seam, with no exposed screws to service, and it is the premium choice for a long-term home. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison: standing seam costs more up front and has no exposed fasteners to maintain. Screw-down costs less and needs its fasteners serviced over its life. We also handle Metal Roof Over Shingles (Retrofit) when the deck is sound, and full tear-off when it is not.
Metal roof work is quoted in two ways. Installs are typically priced per square foot, and repairs are often flat-rate. Final pricing depends on the roof and site conditions, including the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. You will see typical ranges on our pricing page, but every roof is different. Some carriers may offer premium discounts for metal or impact-rated roofs, though that is between you and your insurer.
We quote repair versus replacement plainly, so you can compare real numbers before you commit. Request a free estimate or a free roof inspection and we will walk the roof with you.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent. Coverage decisions rest with your carrier, and we make no promise that a claim will be approved.
On permits: in most jurisdictions, a permit is commonly required for a full replacement, but requirements vary by city, and inspection thresholds differ. Historic district or HOA design review can also affect panel profile and color choices. We are informational only on this and never offer legal advice. Requirements vary. Always verify with the Stockton building or planning department before starting your project. To get started, contact us.
Ready to get started? Stockton Metal Roofing serves in Stockton and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Stockton · Response within 24h · No commitment · ☎ (209) 299-0618
Your Free Quote Request